ANALISIS PENGUKURAN HARMONISA PADA MESIN CUCI KONDISI BERBEBAN DAN TANPA BEBAN

  • Siti Anisah Staff Pengajar Fakultas Teknik Program Studi Elektro Universitas Pembangunan Panca Budi Medan

Abstract

Penggunaan beban non-linier  mengakibatkan terjadinya distorsi harmonik yang berdampak pada buruknya kualitas daya  pada  sistem  tenaga listrik sehingga perlu diperhatikan  batasan -batasan harmonisa yang sesuai dengan standar yang telah ditentukan untuk mengetahui besarnya kandungan harmonisa dalam satu mesin cuci perlu dilakukan pengukuran nilai harmonisa dengan menggunakan alat ukur yang spesifik. Pengukuran dilakukan pada sebuah mesin cuci dengan kondisi berbeban dan tanpa beban,  hasil pengukuran kemudian dianalisis kondisi distorsi harmonik yang terkandung didalamnya setelah itu akan dilakukan perbandingan dengan antara berbeban dan tidak berbeban yang telah ditetapkan. Pengukuran pada mesin cuci saat kondisi berbeban menghasilkan arus harmonisa yang terdistorsi  (THDi) yang lebih besar  dari pada saat kondisi tanpa beban dan masih dibawah standart yang diizinkn.

References

[1]. Pekik Argo Dahono, Harmonics in Power System, School of Electrical Engineering and Informatics, Institut of Tecnology Bandung,2007.
[2]. Wahri Sunanda, Yuli Asmi Rahman, “ Aplikasi Filter Pasif Sebagai Pereduksi Harmonik Pada Inverter Tiga Fasa” Jurnal Ilmiah Foristek Vol.2,No.1,2012.
[3]. Haroon Farooq, Chengke Zhou, Mohamed Farag. “Analyzing the Harmonic Distotion in a Distribution System Caused by the Non-Linear Residential Loads”. International Journal of Smart Grid and Clean Energy vol.2, no.1,2013
[4]. Arrilaga, Jos, Smith, Bruce C, Watson, Nevile R, Wood, Alan R., Power System Harmonics Analysis, Hand book, University of Canterbury,Christchurch, New Zealand, November 2000.
[5]. Supri Hardi, Yaman, “ Peredaman Harmonisa dan Perbaikan Faktor Daya Aplikasi Beban Rumah Tangga” Jurnal Litek Vol.10, No.1, 2013.
[6]. Purushothama Rao Nasini, Narender Reddy Narra,Santosh A, “ Modeling and Harmonic Analysis of Domestic/Industrial Loads” International Journal of Engineering Research and Aplications, Vol.2,Issue 5, 2012.
[7]. M. Shuja Khan, I. Intesar,M.S. Raheel, M.Babar Ali, U. ASAD, M. Farid, U. Ahmed, P.Ali Ayub, “Implementation of a Passive Tune Filter to Reduce Harmonics in Single Phase Induction Motor with Varying Load” International Journal of Engineering & Technology Vol.11,No,03, 2011.
[8]. Jong-Gyeum Kim, Young-Jeen Park, Dong-Ju Lee “ Harmonic Analysis of Reactor and Capasitor in Single-Ttuned Harmonic Filter Application” Journal of Electrical Engineering & Technology Vol,6.No.2, pp.239-244,2011.
[9]. Arindam Dutta, Tirtharaj Sen, S. Senggupta “ Reduction in Total Harmonic Distortion in a Non Linear Load with Harmonic Injection Method” International Journal of Recent Trends in Engineering, Vol 1, No.4, 2009.
[10]. Bhakti I. Chaughule, Amit L. Nehete, Rupali Shinde “ Reduction In Harmonic Distortion Of The System Using Active Power Filter In Matlab/Simulink. International Journal of Computational Engineering Research, Vol,03. Issue,6 2013.
[11]. He Tae Lim, Weui-Bong Jeong, Keun-Joo Kim “ Dynamic Modeling and Analysis of Drum Type Waching Machine” International Journal of Precision Enginering ang Manufacturing vol.11,no.3,pp.407-417 June 2010/407.
[12]. Cristiano Spelta, Sergio Savaresi, Giuseppe Fraternale, Nicola Gaudiano “Vibration Reduction in a Waching Machine Via Damping Control ” Proseding of the word congress the International Federation of Automatic Control, July 2008.
[13]. Ahmed M. Mohammed, “Analysis and Simulation of Shunt Active Power Filter For Harmonic Cancelation of Non Linear Load” Eng & Tech. Journal.Vol.28,No,16. 2010.
[14]. C L Anooja, Nleena “ Passive Filter For Harmonic Mitigation of Power Diode Rectifier And SCR Rectifier Fed Loads” International Journal of Scientific & Engineering Research, Volume 4, Issue 6, 2013.
[15]. Rahardjo, Yadi Yunus,” Perbaikan Faktor Daya Motor Induksi Tiga Fasa” Seminar Nasional VI, 2010.
[16]. A.Priyadharshini, N.Nevarajan,AR. Uma Saranya, R.Anitt “ Survey of Harmonics in Non Linear Loads” International Journal of Recent Technology and Engineering Vol.1, Issue 1, 2012.
[17]. Young-Sik Cho, Hanju Cha, “ Single-tuned Passive Harmonic Filter Desingn Considering Variances of Tuning and Quality Factor” Journal of International Council on Electrical Engineering,Vol.1, No.1, pp.7-13, 2011.
[18]. Sourabh Gupta, Preeti Gupta, “ Harmonic Mitigation Using Active Power Filter” International Journal of Advace Computer Research Vol.3,No.10, 2013.
[19]. Mariamma Baby, Daiskutty Abraham “ Hybrid Filter for Harmonic Mitigation in Medium Voltage Motor Drive” International Journal of Engineering Research & Technology. Vol. 2 Issue 9 2013.
[20]. Aryza, S., Irwanto, M., Lubis, Z., Putera, A., & Siahaan, U. (2017). A Novelty Stability Of Electrical System Single Machine Based Runge Kutta Orde 4 Method. IOSR J. Electr. Electron. Eng. Ver. II, 12(4), 2278-1676.
Published
2021-03-09
How to Cite
ANISAH, Siti. ANALISIS PENGUKURAN HARMONISA PADA MESIN CUCI KONDISI BERBEBAN DAN TANPA BEBAN. Jurnal Elektro dan Telkomunikasi, [S.l.], v. 4, n. 1, p. 5-9, mar. 2021. Available at: <https://jurnal.pancabudi.ac.id/index.php/elektrotelkomunikasi/article/view/1181>. Date accessed: 05 nov. 2024.

Most read articles by the same author(s)

Obs.: This plugin requires at least one statistics/report plugin to be enabled. If your statistics plugins provide more than one metric then please also select a main metric on the admin's site settings page and/or on the journal manager's settings pages.